Composite Materials

Archive

Volume 3, Issue 1, June 2019

  • Effect of Cation Distribution and Structural Properties on Permeability of Ni-Mg Ferrite with Li2CO3 Additive

    Mohammad Rabiul Hassan, Mohammad Torikul Islam, Mohammad Belal Hossain, Sumi Umme Honney, Mohammed Nazrul Islam Khan

    Issue: Volume 3, Issue 1, June 2019
    Pages: 1-8
    Received: 29 November 2018
    Accepted: 16 January 2019
    Published: 31 January 2019
    DOI: 10.11648/j.cm.20190301.11
    Downloads:
    Views:
    Abstract: The structural properties and permeability of polycrystalline Ni0.6Mg0.4Fe2O4 ferrite are studied with the addition of Li2CO3 at 0%, 2%, 4%, and 6%. The samples were synthesized by the conventional ceramic method at 1300C sintering temperature for 6 hours. X-ray diffraction method is applied to understand the crystal structure of the following fer... Show More
  • Numerical Simulation of Flow Processes in Extrusion Tools for Partly Crosslinked and Highly Filled Plastic Melts

    Kalman Geiger, Gerhard Alfred Martin, Andreas Sobotta

    Issue: Volume 3, Issue 1, June 2019
    Pages: 9-21
    Received: 22 October 2018
    Accepted: 1 February 2019
    Published: 28 February 2019
    DOI: 10.11648/j.cm.20190301.12
    Downloads:
    Views:
    Abstract: The complex flow behaviour of partly crosslinked or highly filled polymer melts will be described with a new heuristic flow law, which takes into account the pseudoplastic flow behaviour in the regime of the viscosity curve for low and for high shear rates. The CARPOW law is a combination of the often used power and Carreau law. It describes the fl... Show More
  • Development and Characterization (Thermo-Mechanical and Morphological) of Completely Biodegradable Composites of Polypropylene (PP) Reinforced Short Natural Fiber Jute

    Md. Nazrul Islam, M. A. Gafur, Md. Sahadat Hossain

    Issue: Volume 3, Issue 1, June 2019
    Pages: 22-29
    Received: 17 October 2018
    Accepted: 9 November 2018
    Published: 12 April 2019
    DOI: 10.11648/j.cm.20190301.13
    Downloads:
    Views:
    Abstract: The composites of biodegradable Polypropylene (PP) reinforced with short jute fiber were prepared by melt mixing followed by hot press molding. The composites were prepared with the aim to develop new biodegradable materials for different applications. Jute fiber is well known for its biodegradable properties but PP is not biodegradable material. T... Show More
  • Biosynthesis, Characterization and Photocatalytic Activity of Copper/Copper Oxide Nanoparticles Produced Using Aqueous Extract of Lemongrass Leaf

    Hai Le Tu

    Issue: Volume 3, Issue 1, June 2019
    Pages: 30-35
    Received: 4 December 2018
    Accepted: 30 January 2019
    Published: 12 April 2019
    DOI: 10.11648/j.cm.20190301.14
    Downloads:
    Views:
    Abstract: The paper presents a green, simple and eco-friendly method to synthesize copper/copper oxide nanoparticles (Cu/CuO-NPs) from CuSO4 solution using aqueous extract of lemongrass leaf as the reducing and capping agent. The influence of some factors such as the volume ratio of lemongrass leaf extract and CuSO4 solution, pH and temperature to the synthe... Show More